MiT Pedestals

S1 Pedestal

iMage Mover

The Moving iMage Technologies S1 Cinema Pedestal is designed to securely support cinema projectors and integrate related equipment. The S-1 accommodates DLP cinema projectors from all manufacturers and is sturdy enough to support stacked projectors. The S1 incorporates a tilting platform that can be adjusted to provide up to a 10-degree down angle.

The S1 can be prewired with an optional PDU (Power Distribution Unit) for simplified power distribution. The base provides 14RU (24.5”) of standard 19” rack space to accommodate a wide range of equipment and the full line of MiT accessories including IMC Automation, M-Series Dimmer, IS-20D, and IS-30 Spike Arrestor. The entire MiT accessory complement and third-party hardware can be pre-wired in our factory to your custom specifications. (See separate specifications for details).

Supported Projectors:

Barco, Cristie, Sharp/NEC cinema projectors.

Features:

  • Welded steel construction with durable powder coat finish.
  • Tilt table provides 10-degree down angle with safety latches.
  • Feet-capturing brackets to lock the projector to the base.
  • Seismic hold-down clamps (sold separately).
  • 14U of Standard 19” rack space. 24.5” deep.
  • Conduit knockouts on the front side for routing power and signals.
  • Custom integration and prewire available. 

Part Number(s):

A000461-003                      S1 Base.

Mechanical:

Dimensions (LxWxH): 34.0 x 22.0 x 29.1 in. / 864 x 559 x 739 mm.

Weight: 200 lbs / 90 kg.

Accessories & Options:

[What is the part number and details]                   Large Projector Adapter Plate.

[What is the part number and details]                   S1 Riser and Cart for 60” high port windows.

[What is the part number and details]                   Docking Pin Kit for S-1 Riser and Cart.

[What is the part number and details]                   Seismic Hold-Down Clamps.

A000176-00x                                                               PDU (Power Distribution Unit),(N. America and International versions).

MiT Automations

IS-30 Spike/Surge Arrestor

MiT Dimmers

Integration and Prewire

* Features and specifications are subject to change without notice.

S2 Pedestal

iMage Mover

The Moving iMage Technologies Cinema Pedestal is the most widely used pedestal in cinema today. It has been designed by MiT engineers for ergonomics and functionality, while at the same time being attractive to the eye. The S2 consists of a rugged, welded enclosure made from 14 GA steel to support projectors up to 400 lbs. The S2 provides the option of louvered panels or screen doors for the unused rack mounting areas.

The S2 can be prewired with an optional PDU (Power Distribution Unit) for simplified power distribution. The base provides 14RU (24.5”) of standard 19” rack space to accommodate a wide range of equipment and the full line of MiT accessories including IMC Automation, M-Series Dimmer, IS-20D, and IS-30 Spike Arrestor. The entire MiT accessory complement and third-party hardware can be pre-wired in our factory to your custom specifications. (See separate specifications for details).

Supported Projectors:

Barco, Cristie, Sharp/NEC cinema projectors.

Features:

  • Supports small and large DLP projectors from • all major OEMs.
  • 14 U rack space available from 3 sides for flexible configuration.
  • Internal work light built-in to ease service.
  • Long leveling feet allow tilting to 10 degrees.
  • Conduit knockouts on the front side for routing power.
  • Can be track mounted (iMage Mover).
  • Tilt block available for greater tilt (sold separately).
  • Hold-down clamps secure projector feet.
  • For use in new construction or retrofits.

Part Numbers:

A000310-001                          Standard Pedestal.

Mechanical:

Dimensions (LxWxH): 42.0 x 30.5 x 31.0 in. / 0 x 0 x 0 mm.

Weight: 200lbs / 90 kg.

Accessories & Options:

C003184-001                                                        Tilt Riser Block.

C003199-001                                                        Adapter, NEC projector mount (2 req’d).

A000176-00x                                                        Power Distribution Unit (N. America and International versions).

[What is the part number and details]            Seismic Hold-Down Clamps.

MiT Automations

IS-30 Spike/Surge Arrestor

MiT Dimmers

Integration and Prewire

S3 Pedestal

iMage Mover

The Moving iMage Technologies S3 Pedestal is designed to optimize the consolidation and functionality of cinema components in a convenient package. The S3 consists of MiT’s standard welded enclosure made from 14 GA steel to support projectors up to 400 lbs. The S3 is available with louvered panels or screened doors to cover unused rack mounting areas.

The S3 can be prewired with an optional PDU (Power Distribution Unit) for simplified power distribution. The S3 accommodates a wide range of equipment and the full line of MiT accessories including IMC-2 Automation, M-Series Dimmer, IS-20D, and IS-30 Spike Arrestor. The entire MiT accessory complement and third-party hardware can be pre-wired in our factory to your custom specifications. (See separate specifications for details).

Supported Projectors:

Barco, Cristie, Sharp/NEC cinema projectors.

Features:

  • 28 RU of rack space available from 3 sides to accommodate crucial equipment.
  • Internal work light built-in to ease service.
  • Long leveling feet provide tilting to 10 degrees.
  • Tilt block available for greater tilt.
  • Hold-down clamps capture projector feet.
  • For use in new construction or retrofits.
  • Conduit knockouts on the front side for routing power in and out.
  • May be track mounted.

Part number(s):

A000332-001                          S3 Standard Pedestal.

Mechanical:

Dimensions (LxWxH): 54.0 x 30.5 x 30 in. XX x XX x XX mm.

Weight: 200 lbs. / XX kg.

Accessories & Options:

C003184-001                                               Tilt Riser Block.

C003199-001                                               Adapter, NEC projector mount (2 req’d).

A000176-00x                                               Power Distribution Unit (N. America and International versions).

[What is the part number and details]   Seismic Hold-Down Clamps.

MiT Automations

IS-30 Spike/Surge Arrestor

MiT Dimmers

Integration and Prewire

S3 Low Profile Pedestal

iMage Mover

The Moving iMage Technologies S3 Low Profile Pedestal is designed specifically to accommodate unique projection spaces with height limitations and low port windows. The S3 accommodates crucial equipment while supporting your investment like the conventional S Series Pedestals. The S3 Low Profile Pedestal consists of a rugged, welded enclosure made from 14 GA steel to support projectors up to 400 lbs.

The S3 Low Profile Pedestal can be prewired with an optional PDU (Power Distribution Unit) for simplified power distribution. The base can accommodate a wide range of equipment and the full line of MiT accessories including IMC-2 Automation, M-Series Dimmer, IS-20D, and IS-30 Spike Arrestor. The entire MiT accessory complement and third-party hardware can be pre-wired in our factory to your custom specifications. (See separate specifications for details).

Supported Projectors:

Barco, Cristie, Sharp/NEC cinema projectors.

Features:

  • 16 RU of space available from 2 sides to accommodate crucial equipment.
  • Internal work light built-in to ease service.
  • Long leveling feet provide tilting to 10 degrees.
  • Tilt block available for greater tilt.
  • Hold-down clamps capture projector feet.
  • For use in new construction or retrofits.
  • Conduit knockouts on the front side for routing power in and out.
  • May be track mounted.

Part Numbers:

A000310-001 Standard Pedestal.

Mechanical:

Dimensions (LxWxH): 42.0 x 30.5 x 13 in. XX x XX x XX mm.

Weight: 200 lbs. / XX kg.

Accessories & Options:

C003184-001                                                 Tilt Riser Block.

C003199-001                                                 Adapter, NEC projector mount (2 req’d).

A000176-00x                                                 Power Distribution Unit (N. America and International versions).

[What is the part number and details]     Seismic Hold-Down Clamps.

MiT Automations

IS-30 Spike/Surge Arrestor

MiT Dimmers

Integration and Prewire

S3 Dual Stack

iMage Mover

The Moving iMage Technologies S3 Dual Projector Stacking System provides a robust support frame to add a second projector above our Series 3 low-profile pedestal. It includes an exhaust adapter duct for the lower projector to facilitate HVAC hookup. The stacker frame is fabricated from rugged 10 GA steel and designed to support projectors up to 400 lb. The Dual Projector Stacking System allows on-center targeting for ease of convergence in your Premium Large Format auditorium. The system can accommodate various optional components such as the XL-Mover (2), IMC automation, IS-30 Spike Arrestor, IS-20 Power Managers, or other products, all of which can be pre wired in our factory to your custom specifications. (See separate specifications for the S3 Low Profile Pedestal).

Supported Projectors:

Barco, Cristie, Sharp/NEC cinema projectors.

Features:

  • 16 RU of space available from 2 sides.
  • Internal work light built-in to ease service.
  • Long leveling feet allow tilting to 10 degrees.
  • Conduit knockouts on the front side for routing power.
  • Tilt blocks available for greater tilt.
  • Hold-down clamps capture projector feet.
  • May be track mounted.

Part Numbers:

A000310-001              Standard Pedestal.

Mechanical:

Dimensions (LxWxH): 53.0 x 35.5 x 50 in. XX x XX x XX mm.

Weight: 80 lbs. / XX kg (280lbs mounted to S3 Low Profile Base).

Accessories & Options:

C003184-001              Tilt Riser Block.

C003199-001              Adapter, NEC projector mount (2 req’d).

A000176-00x              Power Distribution Unit (N. America and International versions).

MiT Automations

IS-30 Spike/Surge Arrestor

MiT Dimmers

Integration and Prewire

S5 Pedestal

iMage Mover

The S5 Projector pedestal is designed to maximize equipment rack space in a limited amount of volume. The S5 is intended for cinemas that desire the integration of audio equipment, networking, and projection support items in one pedestal eliminating the requirement for a separate audio rack. The S5 is fabricated out of durable 14 Ga steel to support projectors up to 400 lbs.

The S4 pedestal delivers 26 RU of space to maximize a wide range of equipment and the full line of MiT accessories including IMC Automation, A-LMS Dimmer, IS20-2, and IS-30 Spike Arrestor. The entire MiT accessory complement and third-party hardware can be pre-wired in our factory to your custom specifications. (See separate specifications for details).

Supported Projectors:

Barco and Sharp/NEC cinema projectors.

Features:

  • Extendable legs adjustable for 30” to 42” height.
  • 10” fine adjustment leveling feet.
  • 26 RU rack space in two side-by-side bays.
  • Conduit knockouts front, rear, and sides.
  • Access void bottom center.
  • Easy access lift-out ventilation screen panels with magnetic catches.

iMage Mover

iMage Mover

The MiT iMage Mover Projection Transport System is a custom floor mounting track system that permits two or more projection systems to be positioned laterally in a projection booth to provide a no-compromise scenario of which system is in the center/correct position when in use.

The projection systems may be any combination of film or digital. The track system allows any projection system to be on the projection center line, or share the same port window eliminating the requirement to modify existing buildings. Projectors can be placed close together while minimizing image keystoning of either system while still permitting the user access and service as required. Projection systems and large equipment can be positioned with little effort and locked securely and accurately into place.

Using two track ends without an extension provides an 8’ [2440mm] usable track length. This is the minimum stock length, extensions may be required to achieve the desired length. Custom lengths are available or a continuous track is required.

Note: for the most precise positioning you may elect to use two guided rails forward and rear, however, a flat plate is generally used in the rear for better operator ergonomics.

Note: The iMage Mover system may also be modified to allow one or both projection systems to pivot up to +/-4°. This is desired in some post-production environments to allow side-by-side projection simultaneously or dual 3D systems. For this modification, the B000201-001 KIT, PROJECTOR PIVOT is required in conjunction with C000351-006 spacer blocks with the specific projectors slot pattern to be incorporated. This a custom setup, projection details must be communicated prior to manufacturing.

Features:

  • Low-profile rail system to reduce trip hazard.
  • Heavy-duty steel construction.
  • Standard 6” (152.4 mm) platform height, additional standard platforms or custom spacer heights are available.
  • Solid steel construction with durable black powder coat finish.
  • Continuous, modular, or custom track lengths are available.
  • Large urethane V-wheels with roller bearings.
  • Safety bumpers on carriers and track.
  • 1200lb [550kg] capacity.
  • Positive guide rails prevent dirt or obstructions from interfering with movement.
  • Positive pin locking system for locating carriers in place.

Part Number(s)

B000200-001                      CARRIER PLATFORM, PROJECTION SYSTEM (1 required per projector).

C000351-006                      SPACER BLOCK, PROJECTION SYSTEM, 6” HEIGHT (optional, used in pairs).

C000360-001                      TRACK, GUIDE RAIL, END (4’) [1220mm] (2 ends required per rail).

C000360-102                      TRACK, GUIDE RAIL, EXTENSION (2’) [610mm].

C000360-104                      TRACK, GUIDE RAIL, EXTENSION (4’) [1220mm].

C000361-001                      LINK BAR, GUIDE RAIL (1 required for each joint in the guide rail).

C000362-001                      TRACK, FLAT RAIL, END (4’) [1220mm] (2 ends required per rail).

C000362-102                      TRACK, FLAT RAIL, EXTENSION (2’) [610mm].

C000362-104                      TRACK, FLAT RAIL, EXTENSION (4’) [1220mm].

B000201-001                      KIT, PROJECTOR PIVOT.